WINGS: OVER FLANDERS FIELDS - FAQ / HELP http://www.overflandersfields.com/ UPDATE 30 APRIL 2015 V 4.26 Here you can view latest help, info, and
C. Read more: http://simhq.com/forum/ubbthreads.php/topics/4013991/Bindings_won%27t_stay_bound_(res#Post4013991#ixzz3FaVMOBu3 D. Setting Up Contr
For example, as picture above shows, you decide to use “Yaw Control (Rudder) on your Rudder Pedals. So while configuring your joystick select Axi
IMPORTANT: Repeat the UNBIND for all other bindings that are NOT being used on this controller. Keep only the ones you want to actually use on this
And finally UNBIND ALL other controls that you do not want to use on that controller IF they are listed in ‘Current Bindings’ (area marked above).
If you have “toe brakes” too, check what they are assigned to and remove. They are not normally needed for WOFF and can interfere with other controls
Then, set the FighterStick Y Axis. Set the Fighterstick Throttle Slider to Slider 1 if you wish to use it. Next, set the ProThrottle Throttle
Now disable Toe Brakes on the Pro Pedals (right pedal is shown, do the same for left pedal). Now set Rudder Axis as Slider 0. Make sure you check th
Now download profile to memory. WOFF should recognize these axis and slider assignments. Many Thanks to BirdDogICT for this! You can download his C
manager finally loads the drivers automatically on each startup and assigns proper Device IDs. Once the drivers are stable (without Windows asking to
16) Function Key Mapping tool beeps several times – or POV switch doesn’t work! This is probably because you have FaceTrackNOIR head/face tracking
26) *GAMEPLAY* HOW DO I SELECT A VIEW FROM TARGET-TO-PLAYER? ...25 27) SETTING UP SAITEK QUADRANT CONTROL
installer’s button should change to “Finish”. Click that button to complete the install. 10. Now try to Run WOFF again now (Anti-Virus still disabl
19) Cannot Get to Fly, I see error “WOFF DLL did not start or WOFF DLL runtime crash!” (also see section 40 if you are a WOFF Expansion user!).
are a WOFF Expansion user. If not see other sections in this FAQ, such as General Troubleshooting at the end of the FAQ, or section 17 for reinstall
If overclocking, test that CPU throttling / over heat protection in the BIOS is not enabled. Or it may be lowering the CPU speed during use. You WIL
22) My TrackIR doesn’t work in WOFF, but worked in OFF. If you have Naturalpoint TrackIR software version 4 then you must remove it and install the l
5. Now a re-assign binding window appears. Instead of a key, press a button (not your usual trigger button of course, but another spare button). 6.
27) Setting up Saitek Quadrant controller in Functions key mapping tool. 1. From WOFF’s main menu click Workshops, click Re Map Keys. 2. In the
30) Where are my screenshots stored that I took in sim using the K key? By default they will be in your Documents\OBDWW1 Over Flanders Fields\ fo
But yes the sim will allow you to trim even where the real aircraft had no trime. Some craft like the SE5a had elevator trim the pilot could set, oth
36) TAC display icon guide: Press Shift+t to bring up the tactical display. This is NOT a radar but an aid to the world and objects around the play
1) What do I need, so I can fly WINGS: OVER FLANDERS FIELDS (WOFF)? You need a PC computer with a very minimum of 4GB of RAM, a joystick, a DVD Drive
(d) Try a chandelle or wing-over on a first pass at equal or lower altitude (not diving on someone) in order to shorten turn radius quickly and conver
(note if you installed the latest Update patch, we have put a copy of the above download into C:\OBDSoftware\WOFF\Toolbox\DX9Redist folder. The fil
41) WOFF EXPANSION: Now I do not see a Claim Form pop up after a mission? Correct, with Normal Claims set in the Workshops, now you will not get an
Or click the large orange start button at top left of the TrackIR interface: 3) Make sure you have the latest TrackiR Software version 5.2.2 final
44) WOFF EXPANSION: COCKPIT LIGHTS ONLY LOOK GOOD IN SOME AIRCRAFT? NEW lighting effects are only implemented in aircraft that are suited for night
Cloud Shadow Density: 1 to 10 The darkness of cloud shadows. 10% to 100%. Again as above it is purely visual preference and doesn't affect perfor
47) Sometimes my leader takes off but stays low and circles for a long time? You probably used Shift+W to force the flight to move to the next waypo
LAPTOP USERS’ NOTES Although though we do not recommend laptops, it may be possible to run WOFF. If you get an error as above in section 19), chec
g) Also check carefully through section 20 in the FAQ above which has some good tips on optimising and will also help with troubleshooting. h) Anti Vi
problem. For example just saying "it doesn't seem to work" won't help anyone! So you need to be precise about what you saw.
Next run the WingsOverFlandersFieldsPhase4_1.0 executable. Follow carefully as the instructions are displayed by the installer. You will be require
4) Do I need to install all previous patches too? No, as stated at the top of the download page, “NOTE: Latest update patch always includes all pre
Test that, and if you still have issues, you may also need this setting as per the picture below (you need a Windows restart after applyi
Then change to this; Again, please make sure you download and update WOFF to the latest available version and test before trying these above setti
more information. It blocks various several basic files and often closes critical programs due to apparent false positive detection during install; it
9) Where to get Microsoft Combat Flight Simulator 3 patches: You normally won’t need these unless you have an old CFS3 CD (v3.0) most recent vers
Comments to this Manuals